Advertisement
How does the Aerial X-Joint work?
The X-FLY uses a revolutionary new joint called the 'Aerial X-Joint' that expands inside the pole tubes and has 2x additional
locking screws to lock them together and stop them from coming apart/separating. To optimise the Aerial X-Joint's key
features and ensure correct operation, it is important that you carefully follow these instructions.
AERIAL X-JOINT OPERATION:
Fig. (1.1)
Key
250mm Aerial
Aerial X-Joints are placed between X-FLY pole tubes
to ensure a secure connection. Standard X-FLY
sets are supplied with one 250mm Aerial X-Joint
and X-FLY Pro sets are supplied with an additional
400mm extension and 250mm Aerial X-Joint.
Fig. (1.3)
Pole Tube
Hex Key
The Aerial X-Joint features a mechanism which
expands/contracts to lock/loosen the pole tubes
together. Please test this prior to assembly.
Fig. (1.5)
Pole Tube
CLOCKWISE to
EXPAND/TIGHTEN
4
Copyright© Vertical Leisure Ltd. 2018
LEADERS IN POLE & AERIAL FITNESS
PLEASE NOTE: ANTI-CLOCKWISE = COUNTER CLOCKWISE
Eye Bolt
A-Pole
X-Joint
B-Pole
Bottom Cap
X-Joint
ANTI/COUNTER
CLOCKWISE to
CONTRACT/LOOSEN
Hex Key
®
Fig. (1.2)
250mm (8")
EXPAND
CONTRACT
Safety
Locking Screws
CONTRACT
Safety
Locking Screws
Aerial X-Joints features removable safety locking
screws in addition to the expansion/contraction
screws found on a regular X-Joint to ensure the
X-FLY remains secure during use. X-FLY CANNOT
BE USED WITHOUT LOCKING THE SCREWS.
Fig. (1.4)
Hex Key (6mm)
The Joint expansion is done by FULLY inserting the
6mm Hex Key (with black plastic cover) into the pole
tube & rotating clockwise.
Always remember:
TO EXPAND/TIGHTEN: Clockwise
TO CONTRACT/LOOSEN: Anti/Counter-Clockwise
PROGRESSIVELY TIGHTEN AERIAL X-JOINT,
ALTERNATING BETWEEN EACH END UNTIL NO
FURTHER FORCE CAN BE APPLIED
Version 1.0
Expansion/
Contraction Screws
EXPAND
EXPAND
CONTRACT
CONTRACT
CONTRACT
Pole Tube
X-Joint
Hex Key (6mm)
Fully Inserted
All rights reserved.
Advertisement
