Advertisement
Advertisement
Table of Contents
Related Manuals for SimworX PRO Series
Summary of Contents for SimworX PRO Series
- Page 1 Series Supercar Sequential Shifter Setup Manual...
- Page 2 INTRODUCTION Thank you for purchasing our Pro Series Supercar Sequential Shifter. This product is engineered to the highest engineering standards as found in contemporary motorsport. We are sure you will enjoy your purchase. Our Supercar Shifter features CNC machined polished Aluminium Billet components and a separate gearbox connected via a push rod, as per the real thing.
- Page 3 SX02 Chassis, whether Left or Right Hand Side. The alloy plate is offset to allow seat clearance when fitted up close to the seat. For mounting to a non Simworx simulator chassis we have supplied drilling dimensions below.
- Page 4 Shifter should be automatically detected by Windows and self install. This can be confirmed by going in to “Devices and Printers” in the windows control panel and check if “SIMWORX Pro Series Controls” is listed there. If it does not show up try another USB port on your computer.
- Page 5 Re-insert the bolt and test your new setting. The Simworx default setting are the middle holes at both ends. Shifter feel is very subjective so you may find it satisfactory enough to leave it on our default setting.
Need help?
Do you have a question about the PRO Series and is the answer not in the manual?
Questions and answers