Precautions; Care And Cleaning; Speciic Reasons For Erroneous Measuring Results - ADA INSTRUMENTS Metrix 60 Operating Manual

Target surfaces
Measuring errors can occur when measuring toward colorless liquids (e.g. water) or dust free glass., Styrofoam or simi-
lar semi-permeable surfaces. Aiming at high gloss surfaces may delect the laser beam and lead to measurement errors.
Against non-relective and dark surfaces the measuring time may increase.

Precautions

Please, handle the instrument with care.
Avoid viabrations and hits.
During transportation put the instrument into the soft bag. Note: the instrument should be dry!

Care and cleaning

Do not immerse the instrument in water. Wipe off dirt with a damp, soft cloth. Do not use aggressive cleaning agents or
solutions.

Speciic reasons for erroneous measuring results

Measurements through glass or plastic windows;
•
Dirty laser emitting window;
•
After instrument has been dropped or hit. Please check the accuracy.
•
Large luctuation of temperature: if instrument will be used in cold areas after it has been stored in warm areas (or
•
the other way round) please wait some minutes before carrying out measurements.

Metrix
MEASUREMENT FOUNDATION
60