Table of Contents
Advertisement
Available languages
Available languages
Metrix
60
Volume measurement
For volume measurements, push button
(2) twice until the indicator
for volume measurement appears on the
display. Afterwards, press the button
(1) to measure the length. Press this button
(1) for width. Press
this button
(1) to take the height.
After taking the third measurement, the volume is automatically calculated and displayed. The last individual measured
value is not displayed.
Indirect measurement (pic.5)
Indirect measurement - determining a distance using 2 auxiliary measurements.
E.g. when measuring heights that reguire the measurement of two or three measurements as following step:
Press this button
(3) once, the display
shows.
(1) Aim at the upper point 1 and trigger the measurement.
After the irst measurement the value is adopted. Keep the instrument as horizontal as possible.
(1) Press and hold down this button to trigger continuous measurement, the horizontal line is measured. At the
same time, the result is displayed in the summary line, results in the secondary line.
MEASUREMENT FOUNDATION
2
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the Metrix 60 and is the answer not in the manual?
Questions and answers