Related Manuals for Adexa ZB10
Summary of Contents for Adexa ZB10
- Page 1 ICE MAKER INSTRUCTION MANUAL Model No.: ZB10 Toensureproper useofthis appliance and your safty, please read the following instructions completely before operating this appliance.
- Page 2 CONTENT FEATURES ..........1 NOTES BEFORE OPERATION....1 STRUCTURE.........3 OPERATION PROCEDURES....4 MAINTENANCE........5 TROUBLE SHOOTING......7 CIRCUIT DIAGRAM......8...
-
Page 3: Notes Before Operation
DIAGRAM FEATURES According to the requirement of the international and domestic market of household appliance, we designed our Desk-top Automatic Ice Ice-full Maker. It is compact and nice in appearance and it Switch1 Switch2 Sensor Operation Panel micro-computerized and it makes ice quickly. The structure of the ice maker consists of the water storage tank, water pump, water inlet tube, Condenser Temp Sensor water box, ice making device, ice tilting device, ice pusher and ice... - Page 4 TROUBLE AND SHOOTING 3. Please adjust the feet when placing the ice maker somewhere, otherwise the water level in water box will be effected and so do the TROUBLE CAUSE REMEDY ice. Before using the ice maker for the first time, you should wait The power indicator about 12 hours after positioning it in a proper place.
-
Page 5: Technical Parameter
12. Water drainage screw 9.Do not damage the refrigerant circuit. 13. Water inlet tube 14. Compressor TECHNICAL PARAMETER 15. Water pump Model: ZB10 Climate type: Power: AC220-240V/50Hz Rated current: 0.7A Power Input: 100W... -
Page 6: Operation Procedures
OPERATION PROCEDURES cubes carefully; if no ice blocked, please turn the water box slightly 1.Open the lid, take out the Ice-Storage-Basket and fill the drinkable by hand, 3~5 minutes later, restart the machine. If there is no ice water into the water storage tank directly. Make sure that water level blocking and also it is no use by turning the box slightly, the ice is not over the bottom of the ice storage basket.