Download Print this page

Sanken CS-3e Technical Bulletin

Download this manual

Technical Bulletin CS‐3e RFI modification March 2010

Subject: Microphone CS-3e

Objective:

Improve the physical ground connection and reduce exposure to Radio Frequency

Interference

1. Connector contact

Remove the black paint on the inner part of the microphone

connector shell as shown using sandpaper. This is to

improve the electrical connection between the microphone

and the cable plug connector shell.

Caution!

Only remove the paint, not the black plating under the

paint.

2. Output connector wiring

(a) Remove five screws

(b) Remove the outer tube

Tel: 323 845‐1171 • Fax: 323 845‐1170 • 1155 N. La Brea Ave., West Hollywood, CA 90038

Serial Number Prior to #2792 *

w w w . p l u s 2 4 . n e t

Page 1 Technical Bulletin CS‐3e RFI modification March 2010 Subject: Microphone CS-3e Serial Number Prior to #2792 * Objective: Improve the physical ground connection and reduce exposure to Radio Frequency Interference 1. Connector contact Remove the black paint on the inner part of the microphone connector shell as shown using sandpaper.
Page 2 Technical Bulletin CS‐3e RFI modification March 2010 (c) Unsolder the three internal wires that come from the connector. * Yellow/Green/Black Green Black Yellow (d) Remove screws screw Four (e) Pull connector out of shell w w w . p l u s 2 4 . n e t Tel: 323 845‐1171 • Fax: 323 845‐1170 • 1155 N. La Brea Ave., West Hollywood, CA 90038 ...
Page 3 *Please note that this Sanken authorized update is offered to North American plus-24 customers only. If your CS-3e is still under the one year limited warranty (proof of purchase date required), plus24 will perform the update free of charge. The warranty is voided if the update is performed by the end-user or a dealer. Microphones that are outside the warranty period may be updated by the end-user, a qualified Sanken dealer, or by plus24 for a standard service charge.