Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bauknecht WATS 5350
Summary of Contents for Bauknecht WATS 5350
- Page 2 1.Removing the 4.Water supply • The washing machine must be connected exclusively by means Packaging and check • Connect the water supply inlet of a socket with an earth hose in accordance with the a.Cut and remove the shrink- connection in accordance with regulations of your local water wrap.
- Page 3 We recommend that the first 2. Close the drum flaps. 4. Select a short programme wash cycle be carried out (see programme chart). 3. Pour a small amount of empty. This will remove any 5. Press the “On/Off” button. detergent (about 30 ml) into residual water used in the the detergent dispenser factory checks.
-
Page 4: Sort The Laundry
1. Lid 2. Detergent dispenser 3. Drum flaps • To open the drum press the small flap and hold the large flap. 4. Pump and foreign body trap 5. After-Sales Service sticker (behind the foreign body trap cover) 6. Mobility lever (depending on model) •... -
Page 5: Stain Removal
Stain removal Dyeing and bleaching Starching • Dissolve/dilute the starch, • Blood, milk, egg and other Products usually consist of dye organic substances are powder or liquid, in colour, fixing agent and salt. generally removed by the approximately 1 litre water Pour the dye colour, the fixing enzyme phase of the outside of the washing... - Page 6 Choice of the right If you use descaling agents, dyes • water hardness in your area or bleaches, make sure they are (ask for information from your detergents and additives suitable for washing machine water company): soft water The type of detergent depends use.
- Page 7 Filling up with detergents and additives The dispenser will have three or four compartments depending on model. Pour in the detergent: • Washing powder for prewash and main wash • Washing powder for main wash without prewash Fabric softeners and starch products, no more than to “MAX”...
- Page 8 Preparation of Wash Cycle 3. Turn the programme 5. Press the spin speed selector knob to the reduction button, if 1. Load the machine, close the desired programme. desired. drum flaps and check that 4. Turn the temperature 6. Select the desired options as they are properly locked.
- Page 9 The washing machine is Insert the foreign body provided with a self-cleaning trap again and screw it pump. The foreign body trap fully down in a keeps objects like buttons, clockwise direction to coins, safety-pins etc. which the stop (until the grip is have been left in the laundry.
-
Page 10: Detergent Dispenser
When should I drain residual 5. Let the residual water flow water (draining problem)? into a shallow basin. • Before transporting 6. Wait until the flow stops. (moving) the machine. 7. Fix the drain hose again with • If the washing machine is the clip and replace it with installed in a room subject to the U-bend. - Page 11 Water inlet hose filter 5. Screw the flexible hose back onto the tap by hand. Check and clean regularly Do not use pliers (risk of (at least two or three times squashing the joint). a year). 6. Turn on the tap and check 1.
-
Page 12: Water Inlet Hoses
Recovering an object that 6. Open the drum: you can falls between the drum recover the object through the hole in the drum. and the tub 7. Refit the blade from inside If an object accidentally falls the drum: between the drum and the Position the plastic tip tub, you can recover it thanks above the hole on the right... - Page 13 This washing machine is • the water tap is fully turned *Detergent and additive equipped with automatic safety on, and the water supply product residues remain in functions which detect and pressure is sufficient. dispenser at end of wash. diagnose faults at an early stage •...
- Page 14 Water stop fault Switch the washing machine off Turn on water supply (if “On/Off” by pressing the “On/Off” button is not pressed, but the (depending on model). button, unplug the washing machine begins to fill, turn off the (The pump operates). machine and turn off the water water supply tap and contact The “Water Stop”...
- Page 15 1. Unplug the washing 5. To facilitate moving the machine. machine, pull the handle situated at the bottom front 2. Turn off the tap. (optional on certain models) 3. Remove the water supply out a little by hand and pull and drain hose.
- Page 16 2. Remove the transport Removal of transport bracket. bracket 3. Replace the four outer The washing machine is fitted screws B on the machine and with a transport bracket to tighten them. avoid any possible damage 4. Remove the two seals C from during transport.
- Page 17 Make sure that all feet are Adjust the feet resting correctly on the Install the washing machine floor and that the washing on a level surface, near to machine is perfectly level electrical, water and drain and stable (use a spirit connections.
- Page 18 Water stop anti-flooding • If the flexible hose is system damaged, unplug the (depending on model) washing machine from the mains immediately, turn off • Screw the hose to the water the tap and replace the supply tap. Turn the tap fully hose.
- Page 19 1) For Great Britain only 2) For the Republic of Ireland only Warning - this appliance The information given in must be earthed respect of Great Britain will frequently apply, but a third Fuse replacement type of plug and socket is also used, the 2-pin, side earth type.