Related Manuals for Bauknecht WATS 5550
Summary of Contents for Bauknecht WATS 5550
-
Page 1: Table Of Contents
Contents Before Using the Washing Machine First Wash Cycle Precautions and General Recommendations Description of the Washing Machine Preparation of the Washing Detergents and Additives Programme Selection Cleaning the Foreign Body Trap Draining Residual Water Care and Maintenance Troubleshooting Guide After-Sales Service Transport and Handling Installation... -
Page 2: Before Using The Washing Machine
Before Using the Washing Machine 1.Remove the packaging 4.Water supply • The appliance must be connected exclusively by and check • Connect the water supply inlet means of a socket with an hose in accordance with the a.Cut and remove the shrink- earth connection in regulations of your local water wrap. -
Page 3: First Wash Cycle
First Wash Cycle We recommend that the first 2. Close the drum flaps. 4. Select a short programme wash cycle be carried out (see programme chart). 3. Pour a small amount of empty. This will remove any detergent (about 30 ml) into 5. -
Page 4: Description Of The Washing Machine
Description of the Washing Machine 1. Lid 2. Detergent dispenser 3. Drum flaps • To open the drum press the small flap and hold the large flap. 4. Pump and foreign body trap 5. After-Sales Service sticker (behind the foreign body trap cover) 6. - Page 5 Stain removal Dyeing and bleaching Starching • Blood, milk, egg and other Products usually consist of dye • Dissolve/dilute the starch, organic substances are generally colour, fixing agent and salt. powder or liquid, in removed by the enzyme phase of Pour the dye colour, the fixing approximately 1 litre water the programme.
-
Page 6: Detergents And Additives
Detergents and Additives Choice of the right for domestic washing machines. (ask for information from your If you use descaling agents, dyes water company): soft water detergents and additives or bleaches, make sure they are requires less detergent than The type of detergent depends suitable for washing machine hard water. -
Page 7: Programme Selection
Filling up with detergents and additives The dispenser will have three or four compartments depending on model. Pour in the detergent: • Washing powder for prewash and main wash • Washing powder for main wash without prewash Fabric softeners and starch products, no more than to “MAX”... - Page 8 Start Delay • Press the “Start/Pause” To cancel the “Start (depending on model) button. The indicator light Delay”. of the “Start/Pause” The “Start Delay” is an option • Turn the programme button lights up and the which delays the start of the selector to the “...
-
Page 9: Cleaning The Foreign Body Trap
Cleaning the Foreign Body Trap The appliance is provided with 9. Insert the foreign body a self-cleaning pump. The trap again and screw it foreign body trap keeps fully down in a clockwise objects like buttons, coins, direction to the stop safety-pins etc. -
Page 10: Draining Residual Water
Draining Residual Water When should I drain residual 4. Release the drain hose then water (draining problem)? open the fixing clip located at the rear of the machine • Before transporting (see arrow A). (moving) the machine. 5. Let the residual water flow •... - Page 11 4. Carefully clean the filter Water inlet hose filter located at the end of hose, Check and clean regularly without disassembling it, for (at least two or three times example with a tooth-brush. a year). Note: For machines equipped with hose type 1.
-
Page 12: Troubleshooting Guide
Appliance exterior and Lid seal Water inlet hose(s) control panel • Clean from time to time with a • Check the hose regularly for damp cloth. brittleness and cracks. Replace • Clean with a soft damp cloth. if necessary. • If necessary, a neutral household cleaner can be applied (do not use aggressive or abrasive products). - Page 13 What should I do when the automatic safety system detects a malfunction? The programme is interrupted and various indicators (depending on model) point to the source of the fault. Fault description table. The pilot lamp goes on. Fault description “Water tap” “Water inlet fault”...
-
Page 14: After-Sales Service
After-Sales Service Before contacting Specify: After-Sales Service: • Your full address. • Your telephone number and 1.Try to remedy the problem area code. yourself (see • The nature of the problem. “Troubleshooting Guide”). • The exact model of the The After-Sales Service appliance. -
Page 15: Installation
Installation 2. Remove the transport Removal of transport bracket. bracket 3. Replace the four outer The appliance is fitted with a screws B on the machine transport bracket to avoid any and tighten them. possible damage during 4. Remove the two seals C transport. - Page 16 Make sure that all feet are Adjust the feet resting correctly on the Install the appliance on a level floor and that the appliance surface, near to electrical, is perfectly level and stable water and drain connections. (use a spirit level). If the floor is uneven, adjust The appliance can be installed the feet (do not insert pieces of...
- Page 17 • If the flexible hose is Water stop anti-flooding damaged, unplug the system appliance from the mains (depending on model) immediately and replace it. • Screw the hose to the water If the flexible hose is too short, supply tap. Turn the tap fully replace it with a 3 m Water on and check the water- Stop hose (available from...