Table of Contents
Advertisement
Quick Links
GB
BEFORE USING THE APPLIANCE FOR THE FIRST TIME:
•
IMPORTANT: MAKE SURE YOU HAVE READ THE INSTALLATION INSTRUCTIONS.
•
IMPORTANT: REMOVE THE TRANSPORT SCREWS AND THE TRANSPORT BRACKET.
•
First wash cycle without laundry:
1. Open the tap(s).
2. Close the drum flaps.
3. Pour a small amount of detergent (about 30 ml) into the detergent dispenser
compartment
4. Close the lid.
5. Select a short wash programme and a low spin speed (see programme chart).
6. Switch on the appliance.
This will remove any water remaining in the machine from the manufacturer's test run.
NORMAL DAILY USE:
1. Open the tap(s).
2. Sort the laundry according to fabric type and colour and load the machine.
3. Close the drum flaps.
4. Add detergent and any additives required into the dispenser.
5. Close the lid.
6. Select the programme, temperature, spin speed and special options.
7. Switch on the appliance.
Read these user instructions carefully to learn about all the functions of your washing
machine.
2
QUICK REFERENCE GUIDE
.
Advertisement
Table of Contents
Related Manuals for Bauknecht WATTS 5340
Summary of Contents for Bauknecht WATTS 5340
- Page 1 QUICK REFERENCE GUIDE BEFORE USING THE APPLIANCE FOR THE FIRST TIME: • IMPORTANT: MAKE SURE YOU HAVE READ THE INSTALLATION INSTRUCTIONS. • IMPORTANT: REMOVE THE TRANSPORT SCREWS AND THE TRANSPORT BRACKET. • First wash cycle without laundry: 1. Open the tap(s). 2.
-
Page 2: Table Of Contents
CONTENTS INSTALLATION INSTRUCTIONS PAGE WASHING MACHINE AND ACCESSORIES PAGE PROTECTING THE ENVIRONMENT PAGE SAFETY INSTRUCTIONS PAGE TRANSPORT / HANDLING PAGE PREPARING THE WASH PAGE DETERGENT AND ADDITIVES PAGE DYEING AND BLEACHING PAGE STARCHING PAGE REMOVING THE FOREIGN BODY TRAP PAGE DRAINING RESIDUAL WATER PAGE MAINTENANCE AND CLEANING... -
Page 3: Installation Instructions
INSTALLATION INSTRUCTIONS HOW TO UNPACK THE APPLIANCE 1. Cut and remove the shrink-wrap. 2. Remove the top protection and the protection corners. 3. Remove the bottom protection by tilting and turning the appliance on one rear bottom corner. 4. Open the lid while pressing it slightly down and at the same time operate the handle. - Page 4 INSTALLATION INSTRUCTIONS WATER SUPPLY • Water supply: cold water only • Tap: 3/4” threaded hose connection • Pressure: 10-100 N/cm² (1-10 bar). Should the appliance be installed in a room which is subject to extremely low temperatures, you need to empty water at the end of each wash programme.
- Page 5 INSTALLATION INSTRUCTIONS DRAIN HOSE • Drain hose connection to water outlet. 1. Unhook the drain hose from the right and left hose connection, see A in figure. Important: Do NOT loosen the drain hose connection from the clip on the left side, see B in figure, otherwise there is the risk of leakage (danger of scalding with hot water).
-
Page 6: Washing Machine And Accessories
WASHING MACHINE AND ACCESSORIES 1. Lid 2. Detergent dispenser 3. Drum flaps 4. Pump and foreign body trap 5. Mobility lever (depending on model) 6. After-Sales Service sticker (behind the foreign body trap cover). -
Page 7: Protecting The Environment
PROTECTING THE ENVIRONMENT • Packing For lightly to averagely soiled laundry, use a The packing material is 100% recyclable as programme without a prewash cycle. indicated by the recycling symbol. Use low temperatures or short programmes • Appliance for lightly soiled laundry. The appliance is built from recyclable Use a saving option (see programme chart) materials. -
Page 8: Preparing The Wash
PREPARING THE WASH 1. Sort the laundry according to: • Type of fabric / Care label symbol Cottons, mixed fibres, synthetics, wool, handwashable textiles. • Colour Separate whites and coloured items. Wash new coloured items separately. • Size Wash items of different sizes in the same load to improve washing efficiency and distribute the load more evenly inside the drum. -
Page 9: Detergent And Additives
DETERGENT AND ADDITIVES CHOOSING THE RIGHT DETERGENT DOSAGE The type of detergent depends on: Follow the instructions on the detergent pack in relation to: • type of fabric (cottons, synthetics, delicate items, wool). You can use any make or type of •... -
Page 10: Removing The Foreign Body Trap
REMOVING THE FOREIGN BODY TRAP WHEN SHOULD THE FOREIGN BODY 8. Make sure the pump impeller (in the housing behind the foreign body trap) is not TRAP BE EMPTIED? obstructed. The appliance is provided with a self-cleaning 9. Insert the foreign body trap and screw it fully pump. -
Page 11: Maintenance And Cleaning
MAINTENANCE AND CLEANING APPLIANCE EXTERIOR AND CONTROL PANEL • Clean using normal household cleaner (do not use abrasive products). • Dry with a soft cloth. DOOR SEAL • Clean with a damp cloth when necessary. DISPENSER CLEANING INSTRUCTIONS 1. Push in the buttons on each side of the dispenser. 2. - Page 12 MAINTENANCE AND CLEANING RECOVERING AN OBJECT THAT FALLS BETWEEN THE DRUM AND THE TUB If accidentally an object falls between the drum and the tub you can recover it thanks to a removable plastic lifter: 1. Unplug the appliance. 2. Remove the laundry from the drum. 3.
-
Page 13: Troubleshooting Guide
TROUBLESHOOTING GUIDE This appliance is equipped with safety functions Detergent and additive product residues which detect faults at an early stage and react in dispenser at end of wash. appropriately. Check whether: Often, however, the faults detected are small • the siphon is correctly installed and clean enough to be solved in a matter of minutes. -
Page 14: After-Sales Service
AFTER-SALES SERVICE Before contacting After-Sales Service: 1. Try to solve the problem (see “Troubleshooting Guide”). 2. Restart the programme to see if the fault is repeated. If after the above checks the appliance does not work properly, get in touch with the nearest After-Sales Service Centre.