Frist Fly; Warning&Security - FlySky FS-i6X User Manual

Confirm that the propeller and motor are installed correctly.
Make sure that the propeller does not scratch any parts.
Make sure that the transmitter and the receiver are correctly connected
Verify that (drone, transmitter) is fully charged.
Make sure you are familiar with all flight controls.

3.6 Frist fly

When everything is ready, you can start to enjoy flying
Return the throttle joystick to lowest position (refer to Section 2.3), turn
on the transmitter and check that the switch SA is down
Install and power up batteries for the aircraft
1. After confirming the safety of the environment, turn the switch SB down
（arm the drone） and start your flight
2.For the first flight, please push the throttle joystick slowly and gently to
control the drone to hover stably in front of you to adapt to the sense of
control. The tail is always facing you. When you can hover stably and control
skillfully, slowly increase the flight distance
3.7 Warning&security
1. If the drone collides with any object, turn the switch SA down（disarm
the drone） immediately.
2.Learn to control drone skillfully before flying in a larger area。
3. Battery life will be significantly shortened If you continue to fly after
displaying the low voltage warning
5 Keep the UAV away from water and do not fly in the rain. If the
equipment touches water, it may be damaged by short circuit.