Belkin F5U103-MAC User Manual page 8

Software and Hardware Installation
If you have an iMac computer running Mac
™
Mac ® OS USB drivers version 1.0.1 can be installed by
installing the iMac ™ Update 1.0. This update can be
downloaded from Apple ® 's web site at www.apple.com.
If you have an iMac or a blue and white G3 running Mac
™
8.5, the Mac ® OS USB drivers version 1.0.1 (or later) is already
installed. You do not need to install any further software.
Step 3: Connect the adapter to your USB port.
After restarting the computer, attach the Belkin USB Serial
Adapter for Macintosh to your Macintosh
®
connecting the adapter and the USB device cable (Part#
F3U133-06) to any built-in USB port on your Macintosh
computer or any USB hub. It is not necessary to turn off your
Mac ® when attaching the Belkin USB Serial Adapter.
Note: The DB9 and MiniDIN 8 port cannot be used at the
same time. Connect only one device to either port.
Do not attempt to connect devices on each port at
the same time.
After installing the USB Serial Adapter driver and restarting
the computer, you can connect the USB Serial Adapter. First
connect the USB Serial Adapter to the computer, then
connect a Serial device to the USB Serial Adapter. The Serial
device is now ready for use.
Step 4: Installation Complete!
Your Belkin USB Serial Adapter for Macintosh
for use.
(continued)
OS 8.1, the
®
OS
®
computer by
®
®
is now ready
®
4