Installation Using Macintosh Powerbook - Belkin F5U022 User Manual

P73280/F5U022/man.qxd
Installation using
Macintosh
®
1. Install the USB Adapter Card Support 1.3.5 driver then reboot
the computer. USB Card Support 1.3.5 can be downloaded
from this site:
http://asu.info.apple.com/swupdates.nsf/artnum/n11543?
OpenDocument.
Note: Regardless of the operating system (either OS 8.6 or OS
9.0) USB Card Support 1.3.5 needs to be installed.
2. Insert the Belkin BusPort
PCMCIA slot. An icon named USB will appear on your screen.
3. Connect the 7-inch dongle with two USB ports to the Belkin
BusPort ™ Mobile.
4. Connect your USB device(s) (e.g. USB Mouse, USB Keyboard,
USB Floppy Drive, etc.) to any of the USB ports of the 7-inch
dongle. Your USB devices should start working, if not restart
the computer.
5. If your USB device requires a driver, you need to install the
driver provided by the manufacturer first, in order to make it
work with the BusPort
screen informing you that the driver for that particular USB
device needs to be installed.
1/14/00 3:17 PM
PowerBook
Mobile on the PowerBook
™
™ Mobile. You will get a prompt on your
16
Page 16
's
®