Belkin Components warrants this product to be free from defects in material, content, and workmanship for life. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge. Proof of purchase may be required.
TABLE OF CONTENTS Introduction USB Ethernet Adapter Supplied Components System Setup In addition… Supplied Software Cable Connections Installation (SETUP.EXE) Automatic Installation For Windows 98 System ® Specifying the TCP/IP Parameters Uninstalling Procedures Troubleshooting Specifications...
CATC software drivers provide a bridge between the existing network layer protocols and the USB protocol stack, hiding the details of the USB interface from the application programs. This manual explains how to connect and use the Belkin USB Ethernet Adapter hardware and software with your PC and network environment.
(Specifications are outlined in Section 7.) • Belkin USB cable, 6' • Software installation diskette • Belkin USB Ethernet Adapter User Manual (this manual) 2.2 System Setup Our adapter works with any computer that has a standard USB port. The USB line powers the adapter directly;...
Page 6
Figure 2-1. Basic PC-to-Ethernet Port Connections This document makes several references to an Ethernet port, used to connect the adapter to an Ethernet environment. Such a port might be an Ethernet hub, network wall socket, peripheral device, etc. USB Ethernet Adapter...
Page 7
Figures 2-2, 2-3, and 2-4 illustrate sample applications for the Belkin USB Ethernet Adapter. USB Ethernet Adapter Ethernet Cross Cable Figure 2-2. PC-to-PC Direct Connections USB Ethernet Adapter Ethernet Hub Figure 2-3. PC-to-Ethernet Network Connections...
Cable USB Ethernet Adapter Modem Figure 2-4. PC-to-Cable Modem Connections 3. INSTALLATION (SETUP.EXE) This section outlines the quick and easy, automatic installation procedure for the USB Ethernet Adapter drivers. The installation program automatically detects if your computer is Note: properly configured and initialized for USB installation. If the installation program aborts, see the Troubleshooting section.
3.1 Automatic Installation For Windows The installation procedure assumes that this is a new driver installation on a Windows system. The installation program automatically recognizes if your ® operating system is Windows ® 1. Close any Windows ® applications that may be running on your computer. 2.
Ethernet card. The following sections describe two basic setups using the TCP/IP protocol. A. When the Belkin USB Ethernet Adapter is the only installed network interface. Select My Computer / Control Panel / Network. The Network Configuration form appears. In this form, the USB Ethernet Adapter icon should be visible.
5. UNINSTALLING PROCEDURES If you wish to remove the Belkin USB Ethernet Adapter component from your computer, do the following: 1. Disconnect the USB cable from the adapter. 2. Select My Computer / Control Panel / Add/Remove Programs. 3. In the Install/Uninstall tab, select USB Ethernet Adapter.
Page 12
The system does not respond when connecting the Adapter (for example, the hourglass cursor remains on the screen). Each Belkin USB Ethernet Adapter has a unique encoded Ethernet identifier. Unplugging the adapter from the Windows ®...
32K ( 8-bit SRAM for IN and OUT data buffers 1024-bit non-volatile configuration storage Certification FCC, Class B CE Mark Software Compatibility The Belkin Ethernet Adapter works with any standard Ethernet protocol. The supplied drivers for Microsoft Windows ® 98 and Windows ® 95 (OSR2.1) support...
Need help?
Do you have a question about the F5U011 and is the answer not in the manual?
Questions and answers