MCGUIRE AIR COMPRESSORS INC
Section 3 – Control Panel Start Up and Operation
This start-up guide assumes the compressor package has been properly connected to an electrical
supply conforming to all National and Local electrical codes.
3.1
Apply Power
When energizing the control panel for the first time:
1. Ensure the selector switch is in the OFF position (if equipped).
2. Apply power to the control panel.
3. Press the START/RESET button (if equipped).
See Figure 3-1 below for the layout of the selector switch and push buttons on the Simplex Control
Panel.
ELAPSED TIME
HOUR METER
SELECTOR
SWITCH
START/RESET
BUTTON
Simplex Control Panel
Operation & Service
MCGUIRE AIR COMPRESSORS INC
Figure 3-1: Simplex Control Panel Layout
6
1-888-229-9999
OVERLOAD
RESET BUTTON
CQF3475 v.02
August 06, 2019
1-888-229-9999