Page 1
MagicBox Touchless Soap Dispenser User’s Manual Thank you for choosing the automatic wall mount soap dispenser. Please read the instruction carefully before installation. This manual is for your reference only.
Features Hands free sensor operation improves hand washing hygiene. Easy installation and low-cost maintenance Battery powered. Suitable for schools, offices, supermarkets, hospitals, and other high volume facilities Specifications Power 6V (3 x AA Alkaline batteries) Sensing Range 5 –...
Page 3
Construction / Installation Diagram Box Assembly Using a flat head screw drvier open the front box cover Use the mounting grey plastic bracket as a guide, mark where holes need to be drilled. Important: Make sure bracket and case unit is mounted level. When installing onto a concrete wall, drill holes 30 mm deep using a 6 mm iii.
Page 4
Operations As the user’s hands enter below the beam’s effective range (5 – 15 cm), the beam is reflected back into the sensor receiver and activates the solenoid valve allowing a single soap application to flow from the dispenser. Soap Volume Adjustment No adjustments are required for most settings.
Soap Dispensing Range Adjustments No adjustments are required for most settings. Factory default range is set at 12 cm. The factory setting should be satisfactory for most installations. To adjust the dispensing range: 1. Using a flat head screw driver remove the screw and lower the front box cover. 2.
Care & Cleaning DO NOT USE abrasive or chemical cleaners (including chlorine bleach) to clean dispenser that may dull the luster and attack the special decorative finishes. Use ONLY mild soap and water, then wipe dry with clean cloth or towel. While cleaning the bathroom tile, protect the dispenser from any splattering of cleaner.