Download Print this page
Sony Walkman D-EJ016CK Operating Instructions
Sony Walkman D-EJ016CK Operating Instructions

Sony Walkman D-EJ016CK Operating Instructions

Cd walkman: portable cd player

Advertisement

Quick Links

2-659-304-12 (1)
Portable CD Player
Operating Instructions
"WALKMAN" is a registered trademark of Sony Corporation to represent Headphone Stereo products.
is a trademark of Sony Corporation.
Printed on 100 % recycled
paper using VOC (Volatile
Organic Compound)-free
vegetable oil based ink.
D-EJ016CK
©2005 Sony Corporation
Printed in China
WARNING
Using the CD Player
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.
Power Sources
To reduce the risk of fire, do not cover the ventilation
To use the batteries (not supplied)
of the apparatus with newspapers, tablecloths,
curtains, etc. And do not place lighted candles on the
1 Slide OPEN to open the player lid and open the
apparatus.
battery compartment lid inside the CD player.
2 Insert two LR6 (size AA) alkaline batteries by
To reduce the risk of fire or electric shock, do not
matching the  to the diagram inside the CD player
place objects filled with liquids, such as vases, on the
and close the lid until it clicks into place. Insert the
apparatus.
 end first (for both batteries).
CAUTION
Battery life* (approx. hours)
The use of optical instruments with this product will
(When the CD player is used on a flat and stable place.)
increase eye hazard.
Playing time varies depending on how the CD player
Certain countries may regulate disposal of the battery
is used.
used to power this product. Please consult with your
G-PROTECTION
local authority.
Two Sony alkaline batteries LR6 (SG)
For customers who purchased this product
(produced in Japan)
in the USA
* Measured value by the standard of JEITA (Japan
Note: This equipment has been tested and found to
Electronics and Information Technology Industries
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
Association).
designed to provide reasonable protection against
• The indicator sections of
roughly show the
harmful interference in a residential installation. This
remaining battery power. One section does not
equipment generates, uses, and can radiate radio
always indicate one-fourth of the battery power.
frequency energy and, if not installed and used in
To use the AC power adaptor (not supplied)
accordance with the instructions, may cause harmful
interference to radio communications. However, there
Connect the AC power adaptor as illustrated.
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
Playing a CD
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
1 Slide OPEN to open the lid and fit the CD to the
interference by one or more of the following measures:
pivot, then close the lid.
– Reorient or relocate the receiving antenna.
2 Press .
– Increase the separation between the equipment and
To play from the first track, press  for 2 seconds
receiver.
or more while the CD player is stopped.
– Connect the equipment into an outlet on a circuit
• This CD player can play CD-Rs/CD-RWs recorded
different from that to which the receiver is connected.
in the Compact Disc Digital Audio (Audio
– Consult the dealer or an experienced radio/TV
CD) format, but playback capability may vary
technician for help.
depending on the quality of the disc and the
condition of the recording device.
You are cautioned that any changes or modifications
• This product is designed to play back discs that
not expressly approved in this manual could void your
conform to the Compact Disc (CD) standard.
authority to operate this equipment.
Recently, various music discs encoded with
copyright protection technologies are marketed
by some record companies. Please be aware
that among those discs, there are some that do
not conform to the CD standard and may not be
playable by this product.
Note on DualDiscs
A DualDisc is a two sided disc product which mates
DVD recorded material on one side with digital
audio material on the other side. However, since the
audio material side does not conform to the Compact
Disc (CD) standard, playback on this product is not
guaranteed.
Digital MEGA BASS function
During play, press SOUND/AVLS repeatedly to select
"SND 1" or "SND 2."
If the sound is distorted, turn down the volume.
AVLS* function
* Automatic Volume Limiter System
Press and hold SOUND/AVLS.
If "AVLS" flashes three times, the function is enabled.
If "AVLS" flashes once, the function is disabled.
AMS* / search function
* Automatic Music Sensor
To find the beginning of the previous/current/next/
succeeding track(s): Press / repeatedly.
To go backward/forward quickly: Press and hold
/.
Play mode function
During play, press P MODE/
repeatedly:
No indication (normal play)  "1"(single track play) 
"SHUF"(shuffle play)  "
"(Bookmark play)
To repeat the play mode you selected, press and hold
P MODE/
until "
" appears.
SOUND/AVLS
 (headphones) jack
Headphones
P MODE/
VOL +*/–
OPEN
HOLD (rear)
Display
Play mode
Track number
Playing time
* The button has a tactile dot.
G-PROTECTION function
On dry batteries
The function provides protection against sound
• Do not throw the batteries into fire.
skipping during many active uses.*
• Do not carry the batteries with coins or other metallic
The default setting is "G-on." To select "G-off," press
objects. It can generate heat if the positive and
 while you keep pressing  during stop. To enjoy
negative terminals of the battery are accidentally
high quality CD sound, select "G-off".
contacted by a metallic object.
* Sound may skip: if the CD player receives stronger
• Do not mix new batteries with old ones.
continuous shock than expected / if a dirty or
• Do not use different types of batteries together.
scratched CD is played / when using poor-quality
• When the batteries are not to be used for a long time,
CD-Rs/CD-RWs or if there is a problem with the
remove them.
recording device or application software.
• If battery leakage occurs, wipe off any deposit in
the battery compartment, and install new batteries.
Bookmark play
In case the deposit adheres to you, wash it off
If you add bookmarks to your favorite tracks, you can
thoroughly.
listen to these tracks only from the track with the lowest
On the CD player
number.
G-on G-off
1 During playback of the track where you want to
• Keep the lens on the CD player clean and do not
add a Bookmark, press and hold  until "
touch it. If you do so, the lens may be damaged and
16
11
the CD player will not operate properly.
(Bookmark)" flashes on the display.
• Do not put any heavy object on top of the CD player.
2 Repeat step 1 to add Bookmarks to the tracks you want.
The CD player and the CD may be damaged.
3 Press P MODE/
repeatedly until "
" flashes.
• Do not leave the CD player in a location near heat
4 Press .
sources, or in a place subject to direct sunlight,
excessive dust or sand, moisture, rain, mechanical
To remove the Bookmarks
shock, unleveled surface, or in a car with its windows
During playback of the track with a Bookmark, press
closed.
and hold  until "
" disappears from the display.
• If the CD player causes interference to the radio or
television reception, turn off the CD player or move it
If you change CDs and start playing, all the bookmarks
away from the radio or television.
added for the previous CD will be erased.
• Discs with non-standard shapes (e.g., heart, square,
If you press and hold  for 2 seconds or more
star) cannot be played on this CD player. Attempting
during stop, all the bookmarks stored in memory will
to do so may damage the CD player. Do not use such
be erased.
discs.
On headphones
Troubleshooting
Road safety
Do not use headphones while driving, cycling, or
Should any problem persist after you have made these
operating any motorized vehicle. It may create a traffic
checks, consult your nearest Sony dealer.
hazard and is illegal in some areas. It can also be
"Hold" appears in the display when you press a button, and
potentially dangerous to play your headphones at
the CD does not play.
high volume while walking, especially at pedestrian
 The buttons are locked. Slide HOLD back.
crossings. You should exercise extreme caution or
discontinue use in potentially hazardous situations.
The volume does not increase even if you press VOL +
repeatedly.
Preventing hearing damage
 Press and hold SOUND/AVLS until "AVLS" flashes
Avoid using headphones at high volume. Hearing
once so that you can cancel the AVLS function.
experts advise against continuous, loud and extended
play. If you experience a ringing in your ears, reduce
The CD player does not operate properly.
volume or discontinue use.
 Moisture condensation has occurred. Leave the
player aside for several hours until the moisture
Consideration for others
evaporates.
Keep the volume at a moderate level. This will allow
you to hear outside sounds and to be considerate to
the people around you.
Precautions
To clean the plugs
If the plugs become dirty, there is no audio or noise is
heard. Clean them with a dry soft cloth periodically.
On safety
• Should any solid objects or liquid fall into the CD
player, unplug it and have it checked by qualified
Specifications
personnel before operating it any further.
• Do not put any foreign objects in the DC IN 4.5 V
System: Compact disc digital audio system
(external power input) jack.
Laser diode properties:
On power sources
Emission duration: Continuous
• When you are not using the CD player for a long time,
Laser output: Less than 44.6 µW (This output is the
disconnect all power sources from the CD player.
value measured at a distance of 200 mm from the
objective lens surface on the optical pick-up block with
On the AC power adaptor
7 mm aperture.)
• Use only an AC-E45HG AC
Polarity of the plug
Power requirements:
power adaptor (not supplied).
• Two LR6 (size AA) batteries: 1.5 V DC × 2
Do not use any other AC
• AC power adaptor (DC IN 4.5 V jack): 120 V, 60 Hz
power adaptor. It may cause a
Dimensions (w/h/d) (without projecting parts and controls):
malfunction.
Approx. 139.8 × 27.9 × 139.8 mm
• Do not touch the AC power adaptor with wet hands.
(5
• Connect the AC power adaptor to an easily
accessible AC outlet. Should you notice an
Mass (excluding accessories):
abnormality in the AC power adaptor, disconnect it
Approx.196 g (7.0 oz.)
from the AC outlet immediately.
Operating temperature: 5°C - 35°C (41°F - 95°F)
Design and specifications are subject to change
without notice.
Supplied accessories
• Headphones (1)
• Car connecting pack (1)
• Car battery cord (1)
• Velcro tapes (2)
DC IN 4.5 V
to an AC outlet
Bottom of the CD player
AC power adaptor
(not supplied)
/
*(play/pause)
 (stop)
Remaining battery power
Console box
Sound mode
Bookmark
Installing in a Car
Installation
CD player 
Attach the CD player to the console box with the
supplied Velcro tapes.
Notes
• Do not affix Velcro tapes to the name plate or any
control.
• When you are going to park your car for a long period
of time, remove the CD player from the Velcro tapes
so that it will not be exposed to direct sunlight.
• Do not install the CD player in an unstable place or
where any objects around it may interfere.
• Do not install the CD player on a dashboard.
• Install the CD player so that it will not interfere with
your driving.
Connection 
To listen to the CD player through the car cassette
deck, make connections as shown.
When the power is turned on, the LED lamp of the
supplied car battery cord lights up.
Operation
1 Turn down the volume of the car cassette deck and
CD player.
2 Set the tape selector to the normal (TYPE I) position,
and the DOLBY NR, REPEAT or BLANK SKIP switch
to OFF if they are equipped.
3 Insert the car connecting pack into the cassette
deck.
4 Start playback on the car cassette deck.
5 Start CD playback.
6 Adjust the volume.
If no sound is heard or the car connecting pack is
ejected, change the direction of playback on the car
cassette deck.
To remove the car connecting pack, press the 
(eject) button of the car cassette deck.
Notes
• Never insert the cord end of the car connecting
pack into the cassette insertion door. Otherwise, the
cord may break or the car cassette deck may be
damaged.
• You cannot use the car connecting pack with some
car cassette deck.
• The cord should be placed so that it does not hinder
driving.
• To disconnect the cord from the CD player, pull it
out by grasping the plug. Never pull the plug out by
the cord.
• With some car cassette decks, you may hear some
rattling noise from the car connecting pack. However,
this is not a sign of malfunction.
5
/
x 1
1
/
x 5
5
/
in.)
8
8
8
Car cassette deck
CD player
to a cassette
insertion door
to  (headphones)
jack
to a cigarette
lighter socket
Car connecting
pack
Audio signal
Car battery cord
Precautions
Specifications
• Do not install the CD player in a location which:
Car connecting pack
— interferes with your driving.
— may be dangerous for passengers.
Frequency response: 50 - 20 000 Hz*
— interferes with the glove box lid or ashtray when
* Differs depending on your car cassette deck.
opening it.
Dimensions: Approx. 102.4 × 12.1 × 63.8 mm
— is near heat sources.
(4
1
/
x
1
/
x 2
5
/
in.) (w/h/d) including projecting parts
8
2
8
— is subject to direct sunlight, excessive dust, or
Mass: Approx. 42 g (1.5 oz.)
moisture (especially on a dashboard).
Cord length: Approx. 1.5 m
• The 4.5V DC plug supplied with car battery cord
Car battery cord
conforms to the proposed standards of the Japan
Electronics and Information Technology Industries
Input voltage: DC 12 V/24 V (only for negative 
Association (JEITA). Do not connect it to other
grounded cars)
players.
Rated output voltage: DC 4.5 V
Rated output current: 500 mA
Polarity of the plug
Dimensions: Approx. 32 × 28.1 × 95.5 mm
(JEITA standards)
(1
5
/
x 1
1
/
x 3
7
/
in.) (w/h/d) including projecting
16
8
8
parts
Mass: Approx. 53 g (1.9 oz.)
Please understand that we will not incur any
Cord length: Approx. 1.5 m
obligations for troubles caused by incorrect installation.
Design and specifications are subject to change
If you have any questions or problems concerning your
without notice.
CD player, please contact your nearest Sony dealer.
Fuse Replacement
If the CD player does not operate, check the fuse.
If it is blown, replace it as follows:
This warranty is valid only in the United States.
1 Turn off the CD player and remove the cigarette
lighter plug from the cigarette lighter socket.
2 Remove the plug end by turning it counterclockwise.
3 Remove the defective fuse from the plug.
4 Insert a new fuse into the plug.
5 Replace the plug end by turning it clockwise.
Remove
Fuse
Plug end
Cigarette lighter plug
Notes
• Be sure to use a fuse of the same amperage and
length as the one to be replaced. Never use a piece
of wire as a substitute for the fuse.
• If the fuse is blown again after replacing it, contact
your nearest Sony dealer. In such a case, bring the
defective fuse to the dealer with you.
to DC IN 4.5 V

Advertisement

loading