Britax ONE4LIFE CLICKTIGHT Canadian User Manual page 34

1. Refer to page 37 to
convert from harness to
BOOSTER
2. Adjust the child
restraint to position
"B" by pushing the red
recline button on either
side of the base.
3. Open the CLICKTIGHT
door. Squeeze the
CLICKTIGHT release
buttons underneath the
front cover flap and lift
to open.
4. Open the storage
pocket. Remove the
lower connectors by
pushing the red buttons
and by pulling away
from the child restraint.
5. Extend lower connector
strap to its longest
length by pressing the
grey button on adjuster.
6. Place child restraint on
the vehicle seat so that the
bottom of the base sits flat
on the vehicle seat.
NOTE: If your vehicle seat
back is adjustable, ensure
it is in the upright position
before placing the child
seat on the vehicle seat.
7. Ensure the base does
not hang over front edge
of vehicle seat.
32
mode.
B
B