Adjust The Colour Of The Power Leds; Set Automatic Shutdown - Burmester 175 Owner's Manual

tune the record plAyer

Adjust the colour of the Power LEDs

You can adjust the colour of the Power LEDs . There are two separate colour schemes
available. Each colour scheme applies globally, for the record player as well as the
power supply unit .
In delivery state, the Power LEDs are red in standby mode. When the device is switched
on, the light is green. If the device is turned off, the Power LEDs are not lit.
Change the colour scheme:
The device is turned on .

1 . Turn the speed setting (1) to the value 45 .
2 . Press the power switch (8) for 15 seconds upwards .
 The colour of the LED changes .
 The record player and the power supply unit are changed to the other colour
scheme .
Scheme
1
2

Set automatic shutdown

The device has an automatic shutdown (Auto Power Down) .
If this is activated, the device automatically goes into standby mode after 20 minutes of
inactivity (the speed setting (1) must be set to OFF .
Activate automatic shutdown
 The Auto Power Down switch (8) is set to OFF .
► Switch the Auto Power Down switch (8) to ON .
Automatic shutdown is activated .

Deactivate automatic shutdown
 The Auto Power Down switch (8) is set to ON .
►
Switch the Auto Power Down switch (8) to OFF .
Automatic shutdown is deactivated .

16
switched on standby
green red
red orange
switched off
off
off