Set Up Anti-Skating - Burmester 175 Owner's Manual

Set up anti-skating

With anti-skating, you can set up the counterforce to balance the power of the tonearm.
This guarantees a flawless audio experience.
 The record player is turned off .
1 . Place the Burmester reference check record with side A facing upwards on the
turntable and switch on the record player .
2 . Turn the speed setting (1) to the value 45 .
 The record begins to turn .
3 . Loosen the transport lock (14) if necessary .
4 . Lift the tonearm with the cue control lever (18) .
5 . Move the tonearm (3) to the middle of the free area .
6 . Lower the tonearm with the cue control lever (18) .
 The cartridge must maintain its position and not drift inwards or outwards .
If the cartridge does not maintain its position:
7 . Turn the anti-skating setting (19) slowly clockwise .
8 .
If the drifting gets worse, change the direction you are turning.
9 . Turn in the direction required until the cartridge maintains its position .
note: Sometimes it can benefit the sound if you set up anti-skating so that the tonearm drifts
slightly outwards .
175 Turntable
tune the record plAyer
15