Table of Contents
Advertisement
Connect the record player
►
Note the operating instructions of the connected components before connecting .
1 .
Make sure that the amplifier the record player is to be connected to is turned off.
2 .
Insert any end of the multi-pole power supply cable into the Power Supply Socket
(11) of the record player (observe guide slot) .
3 .
Connect the other end of the cable to the Power Supply Socket (21) of the external
power supply unit (observe guide slot) .
4 .
Make sure that the Power Switch (22) on the back of the external power supply is
switched to OFF .
5 .
Check that power voltage provided by your electricity grid matches the voltage
information of the external power supply .
note:
You can find information on the voltage required under the power socket(23) .
6 .
Connect the power cable with the power socket (23) and plug the power plug into
the socket .
7 .
Connect the symmetrical output (10) with the desired high-level input of your
system .
Damage to the record player or the amplifier
The record player has its own phono amplifier that cannot be deactivated . The
connected amplifier or the record player can be damaged if they are connected to
the phono input of the amplifier .
►
Never connect the record player to a phono input .
8 .
Switch the power switch (22) to ON .
175 Turntable
connect the record plAyer
WARNING
13
Advertisement
Table of Contents
