Read This First; Important Safety Information; Hazard Warnings - Bellman & Symfon BE9159 Medical Device Information

Read this first

Thank you for choosing a product from Bellman &
Symfon, the world leader in alerting systems based in
Gothenburg, Sweden. This leaflet contains important
medical device information. Please read it carefully to
make sure that you understand and get the best out of
your Bellman & Symfon product. For more information
about features and benefits, contact your hearing care
professional.
About the BE9159/BE9161 Neck loop
Intended purpose
The intended purpose of this device is to connect hear-
ing aids that are equipped with Telecoil to a personal
amplifier or listening system. It can also be used to con-
nect hearing aids to smart devices, TVs, radios or other
sound sources that features a 3.5 mm headphone jack.
Principle of operation
The neck loop changes the incoming sound signal to
a magnetic signal which is then transmitted wirelessly
through the wire loop to the hearing aids.
Intended user group
The intended user group consists of people of all
ages with mild to severe hearing loss that need audio
amplification.
Intended user
The intended user is a person with mild to severe
hearing loss.
3
This device will not restore normal hearing
and will not prevent or improve a hearing
impairment or deafness resulting from organic
conditions.

Important safety information

This section contains important information about
safety, handling and operating conditions. Keep this
leaflet for future use. If you are just installing the
device, this leaflet must be given to the householder.

Hazard warnings

Failure to follow these safety instructions
could result in fire, electric shock, or other
injury or damage to the device or other
property.
Keep this device out of reach of children under
3 years.
Do not use or store this device near any heat
sources such as naked flames, radiators, ovens
or other devices that produce heat.
Do not dismantle the device; there is a risk of
electric shock. Tampering with or dismantling
the device will void warranty.
This device is designed for indoor use only.
Do not expose the device to moisture.
EN
4