Belkin OmniView PRO F1D108-OSD User Manual page 17

P73055/F1D108-OSD/EU/man.qxd
On-Screen Display Menu Control:
To get into the On-Screen Display (OSD) menu, press SCROLL LOCK, SCROLL LOCK,
SPACEBAR. Immediately, the OSD overlay screen appears. This screen is generated by the
OmniView ™ PRO, and does not affect your computers or running software in any way.
The main OSD screen
menu is shown on the
right. It shows the
currently selected
BANK. If you have only
one OmniView
™
it will say "BANK 0".
The current selected
port is shown in RED.
A " " indicates that
the computer
connected to that port
is powered up.
• You can navigate through the active ports by using the arrow keys. The OSD menu will
only allow you to move to active ports.
NOTE: If a computer is connected and is powered up, but the OSD menu does not display
a " ", you will have to RESET the OmniView
computers. This is done by simultaneously pressing the BANK/SCAN and CHANNEL
buttons on the front panel.
NOTE: Pressing
• Pressing the INSERT key allows you to rename the port. Press ENTER to complete.
NOTE: Inadvertently pressing the SCROLL LOCK, SCROLL LOCK, DELETE keys will erase
any given names on the OSD menu.
• Pressing the ESC key exits the current screen.
• To view a different BANK, pressing the PAGE UP key goes to a previous BANK, while the
PAGE DOWN key brings you to the next BANK.
• Once you have selected a computer on the menu, press ENTER to switch to that port.
• Pressing the TAB key opens up the Function menu. In this menu, you can select the
SCAN TIME and the DISPLAY TIME.
4/21/00 2:25 PM
Usage
Enable the On-Screen Display Menu
Currently
selected
Port is
in RED
PRO,
Currently
selected
Bank
Address
will reset the keyboard ports of the OmniView
Page 13
(continued)
Belkin: F1D108-OSD
1. WIN98
2. NT SERVER
3. MAC OS8
4. NET SRVR
5. UNIX SRVR
6. CHANNEL 6
7. CHANNEL 7
8. CHANNEL 8
BANK 0
(TAB): FUNCTION / HELP
:PgUp :PgDn
PRO to re-detect the powered
™
13
En
" " indicates
PC is powered
Pro.
™