Advertisement
Quick Links
Advertisement
Related Manuals for Walker Edison OREGGCH
Summary of Contents for Walker Edison OREGGCH
- Page 1 Item # : OREGGCH Assembly Instructions Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com Revised 20/12/2019 (E) Walker Edison ® © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved.
- Page 2 Walker Edison Furniture, LLC 4350 West 2100 South, Salt Lake City, UT 84120 Toll Free: 1-877-203-2917 www.walkeredison.com Monday - Friday 8 am to 5 pm (MST) © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved.
-
Page 3: Parts List
Parts List © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. -
Page 4: Hardware List
Iron chain Philips head screwdriver required for assembly (not included) The hardware quantities listed above are required for proper assembly. Some extra hardware may also have been included. © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. - Page 5 Insert part (3) into part (5) and then insert part (3) into part (7),using bolt (A) secure part (7) to part (3) to part (3) with Hex Key (G) as per diagram. © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved.
- Page 6 (F) into the head of bolt (B) and using wrench (H),tighten Nut (D) with flat wash (C) to bolt (B) to fix part (1,3) together ,using bolt cap (E) cover the Nut (D) as per diagram. © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved.
- Page 7 Step 3 Insert Iron bolt (J) into part (1) ,then place spring hook (K) into iron bolt (J) as per diagram. © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved.
- Page 8 Step 4 Place Iron Chain (M) to part (K) ,then connect iron ring buckle (L) to part (M) as per diagram. Note:Please keep the iron ring buckle open. © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved.
- Page 9 . If you want to adjust the seat height. Fasten the iron ring buckle (L) lay down part (2) and choose the desired phase of iron chain (M) for placing iron ring buckle (L) and repeat this step . © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved.
- Page 10 Step 6 Put parts (4,6) as per diagram, then tighten all the belts to part (2). © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. P.10...
-
Page 11: Final Assembly
Step 7 Final Assembly © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. P.11...