Related Manuals for Walker Edison OWTEX
Summary of Contents for Walker Edison OWTEX
- Page 1 Item #: OWTEX Assembly Instructions For our most current instructions, to request missing, lost or broken parts, or for any other Customer Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906. Revised 02/2012...
-
Page 2: Parts List
Parts List... -
Page 3: Hardware List
Hardware List Small wood screw Large wood screw Large bolt Small bolt Small screw Large screw Latch screw Phillips head screwdriver required for assembly (not included) -
Page 4: Assembly Options
Assembly Options Follow Steps 1-17 to assemble the table. Final assembly will be the table in its extended form. The table also has a compact form. Follow Steps 18-22 for instruction on how to put the self-contained leaf away. - Page 5 Secure slat (15) to legs (13,14) using large screws (G). Tighten large screws (G) with wrench (J). Repeat this step for second set of legs (13,14). Secure slat (16) to legs (13,14) using large screws (G). Secure supports (17) to legs (13,14) using small screws (F).
- Page 6 Secure umbrella supports (19) to slats (18) using large screws (G). Tighten large screws (G) with wrench (J). Attach slats (18) to slats (16) using large screws (G). Tighten large screws (G) with wrench (J).
- Page 7 Insert slat (6) into slat (5). Repeat this step for second set of slats (5,6). Secure slat (7) to slats (5,6) using small bolts (E). Tighten small bolts (E) with wrench (J). Repeat this step for second set of slats (5,6,7).
- Page 8 Secure slat (12) to slats (8,9) using small screws (F). Tighten small screws (F) with wrench (J). Secure slat (11) to slats (8,9) using small wood screws (A). Tighten small wood screws (A) with a screwdriver.
- Page 9 Construct the inner frame of the table by securing the slat (6) assemblies from Step 6 to slats (8,9,10) using large screws (G). Tighten large screws (G) with wrench (J). Carefully slide the leg assembly from Step 4 into place along the inner frame assembly from the previous step.
- Page 10 Secure supports (17) to the inner frame assembly using small screws (F). Tighten small screws (F) with wrench (J). Secure each leg to the inner frame assembly using large bolts (C) and sleeve nuts (D). Tighten large bolts (C) and sleeve nuts (D) onto each other using wrenches (J). Carefully slide table top sections (1,3) into place.
- Page 11 Carefully lay table top section (2) into place. Carefully flip table over onto a soft surface. Attach draw pull latches (I) to table top sections using latch screws (H) as shown above. Tighten screws (H) with a screwdriver. Insure that draw pull latches (I) can appropriately lock and unlock.
- Page 12 Secure slat (12) to table top section (2) using large wood screws (B). Tighten large wood screws (B) with a screwdriver. Attach blocks (4) to all table top sections using small wood screws (A) as shown above. Tighten small wood screws (A) with a screwdriver.
-
Page 13: Final Assembly
Option A Final Assembly To put the extendable leaf of the table away, unlock the draw pull latches. You do not need to flip the table over to unlock the draw pull latches. The diagram is shown as such for illustration purposes only. - Page 14 Carefully fold table top section (2) over itself. Carefully rotate table top section (2) so it rests on the inner frame of the table.
- Page 15 Carefully slide table top sections (1,3) together. Lock draw pull latches of table top sections (1,3) together. Option B Final Assembly...