Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for BITMAIN AntMiner S4+
Summary of Contents for BITMAIN AntMiner S4+
- Page 1 BITMAIN AntMiner S4+ Manual...
-
Page 2: Table Of Contents
AntMiner Manual Last updated: 4/22/2015 Page 2 of 9 Contents Overview ........................... 3 Features ............................. 3 Connect to Miner ........................3 Miner Configuration ........................6 Pool Setting ........................6 Frequency Modification ....................6 Miner Status ..........................7 System Configuration and status ....................7 System Upgrading ...................... -
Page 3: Overview
Page 3 of 9 1 Overview Bitmain is introducing the newest miner: the AntMiner S4+. More powerful and efficient than its predecessor, the S4+ packs quite a punch. It uses the state of the art BM1382 chip powered by ultra-low power 28nm technology, with 2570Gh/s hash rate. S4+ will be shipped out with built-in PSU and it’s tested and configured prior to shipping to make it easier for customers to set up. - Page 4 AntMiner Manual Last updated: 4/22/2015 Page 4 of 9 the miner. Note: when finding the IP address, the PC and miner should be connected to the same router via Ethernet wire. 1. Extract the file and double click ‘IPReporter.exe’. The ‘Shelf, Step, Position’ options are suitable for farm miners to mark the location of the miners.
- Page 5 AntMiner Manual Last updated: 4/22/2015 Page 5 of 9 Step 2. Enter the IP address provided into your WEB browser and proceed to login using ‘root’ for both the username and password. In the ‘Network’ section, you can assign a ‘Static’ IP address if you like. Click ‘Save&Apply’ after modifying it.
-
Page 6: Miner Configuration
AntMiner Manual Last updated: 4/22/2015 Page 6 of 9 4 Miner Configuration 4.1 Pool Setting You can configure your miner through ‘Miner Configuration->General Settings‘. Pool URL- Enter the URL of your desired pool in this column. Worker- This is your worker ID on the selected pool. Password- This is the password for your selected worker. -
Page 7: Miner Status
AntMiner Manual Last updated: 4/22/2015 Page 7 of 9 5 Miner Status You can check the operating status of your miner on ‘Miner Status’ page. ASIC#: Number of chips detected in the chain Frequency: ASIC frequency setting Temp: Temperature, centigrade ASIC status: o stands for OK, x stands for error. -
Page 8: Password Modification
AntMiner Manual Last updated: 4/22/2015 Page 8 of 9 ‘Keep setting’ is chosen by default and should be enabled if you want to keep your current settings. You should deselect this option if you are trying to return the miner to default settings. Click ‘Browse’... -
Page 9: Software Version Checking
AntMiner Manual Last updated: 4/22/2015 Page 9 of 9 6.3 Software Version Checking You can check which version of the software you are currently running on the ‘System->Overview’ page. ‘File System version’ displays the date of the firmware your miner use. In the example below, the miner is using 20150402 firmware.
Need help?
Do you have a question about the AntMiner S4+ and is the answer not in the manual?
Questions and answers