Advertisement
Thursday, November 21, 2013 | Z1 Clinician Programming Reference, v1
Z-Breathe™ Algorithm Settings
There are two Z-Breathe Algorithm settings:
CPAP–1 Enables the Z-Breathe™ Algorithm at a gentle response rate which adjusts
the airflow gradually during the inhalation-exhalation cycle. In this setting, the
algorithm will initially adjust rapidly to breathing, but the adjustments will become
gentle and gradual after a few inhalation-exhalation cycles.
CPAP–2 Enables the Z-Breathe™ Algorithm at an aggressive response rate which
adjusts the airflow rapidly during the inhalation-exhalation cycle.
To change the Z-Breathe™ Algorithm setting:
1. The unit must be in Standby Mode (pressure of "0.0" indicated on the display).
2. Hold down both the up and down arrow buttons at the same time until you see
"CPAP-1" or "CPAP-2" flashing on the display.
3. Press the up or down arrow buttons until you observe your desired setting on the
display.
4. To lock- in the setting, hold down the Start/Stop button until the "CPAP – X" indicator no
longer flashes on the display.
Property of HDM. Confidential clinician information. Do not distribute.
Advertisement
