HDM Z1 Auto Getting Started Manual

LCD Display Overview
The Z1 Auto display offers useful information on device settings. Below is a brief
overview of the information available using the built-in LCD. For more information,
please refer to the Z1 Auto User Guide.
1. Treatment pressure display
2. Ramp progress indicator (if ramp set)
3. Ramp time remaining (if ramp set)
4. Battery status (if present)
5. AC Power indicator (if connected)
6. General status display
7. Fault indicator (if fault occurs)
8. Reminder indicator (if excessive air
leakage occurs)
If you encounter problems consult the Z1 Auto User Guide or contact
the Support Center toll-free at 1-855-436-8729 (855-HDM-USA9).
To register your device, visit http://www.hdmusa.com/register or fill
out and return the included Warranty Registration Form.
Designed in the United States of America.
Human Design Medical, LLC, Charlottesville, VA 22902
The HDM logo and Z1 are registered trademarks of Human Design Medical, LLC. Z1 Auto is a trademark of
Human Design Medical, LLC.
Patent Pending. © Copyright 2014, Human Design Medical, LLC. All rights reserved.
AN AFFILIATE OF BREAS MEDICAL AB
Z1 Auto Getting Started Guide v1, 111014
# 40-0029 Rev. A
Z1 Auto Getting Started Guide
™