Advertisement
Thursday, November 21, 2013 | Z1 Clinician Programming Reference, v1
Device Pressure Settings
To set the treatment pressure:
1. Hold down the Start/Stop button while in Standby mode (display shows "0.0"). The
current treatment pressure number will flash on the display.
2. Press the Up/Down buttons until the desired treatment pressure is displayed.
3. To save the settings, hold down the Start/Stop button until the Standby displays "0.0"
4. Press the Start button to start the flow of air and confirm the desired treatment pressure
is shown on the display. Press Stop to stop the flow of air.
Property of HDM. Confidential clinician information. Do not distribute.
Advertisement
