Explication - Opus Technologies DCL20-PLUG Installation And User Manual

DCL20-PLUG | Manuel d'installation et d'utilisation | Installation and user manual |
20

5. Explication

The wire forming the loop are connected to an
audio amplifier. The hearing aid often called "T"
or "T-coil" which is placed inside spirale wire.
The magnetic field generated by the large loop
will cross the coil and, by the induction process,
the electrical signal present in the large loop will
be found in the one small. The signal of the au-
dio amplifier is transmitted to the hearing aids,
which will then restore it to the ear of the im-
paired ones.
The loop can be installed in the floor or at the
roof level, more precisely between 1.10m and
2.20m from the listening height (ears).
The presence of an hearing loop is often indi-
cated by a blue logo representing a crossed out
ear and a letter T. Generally, a hearing aid has
two major positions, the M and the T. The posi-
tion M makes it possible to perceive the sound
thanks to sound pressure as a microphone, while
the position T (T for telephone) directly receives
the audio signals transmitted by induc- tion via
the integrated coil. Some aids combine these two
modes of operation with the MT posi- tion. It
allows the hearing impaired to perceive both
ambient noise and inductively transmitted
signals.