Related Manuals for Bartscher IK 35Basic
Summary of Contents for Bartscher IK 35Basic
- Page 1 IK 35Basic 105924 Instruction manual Instrukcja obsługi Инструкция по эксплуатации V1/0519...
-
Page 2: Safety Instructions
Read these instructions before using and keep them available at all times! Safety instructions This device is designed in accordance with the presently applicable technological standards. However, the device can pose a danger if handled improperly and inappropriately. Electrical current ... - Page 3 Never use the appliance near flammable or inflammable materials, e.g.: petrol, spirit, alcohol, etc. High temperature triggers evaporation of these materials, and, as a result of contact with sources of ignition, an explosion may occur. In case of fire, disconnect the appliance from the power supply before attempting suitable fire-extinguishing actions.
-
Page 4: Intended Use
This appliance is intended for use in households and similar places. The induction cooker is solely intended for preparation and heating of dishes using appropriate cookware. Technical Data Name Induction cooker IK 35Basic 105924 Art. no.: Material: Housing: stainless steel; heating surface: glass Time setting: 0–180 minutes, interval setting: 5 minutes... -
Page 5: Installation
Version / Characteristics Number of hobs: 1 Cookware detection Overheating protection Regulation of: power, temperature, time Digital display ON/OFF button Indicator light: on/off Control: electronic, touch Appliance connection: ready to plug in Installation ... -
Page 6: Power Supply Connection
Power supply connection Verify if technical data of the appliance (see rating plate) correspond with the local electric power grid specification. Connect the appliance to a single, properly grounded mains socket with protective contact. Do not connect the appliance to a multi-socket. ... -
Page 7: Operation
Operation Control Panel ⑧ ⑤ ④ ⑥ ② ③ ⑦ ① ① Time setting button ② Temperature setting button ③ Power setting button ④ selection buttons: time, temperature or output level may be reduced ⑤ Digital display ⑥ selection buttons: time, temperature or output level may be increased ⑦... - Page 8 Power setting Press the button, to switch to the power mode. Factory set power value of 2,000 W will be displayed. Press the selection buttons to change, at any moment, a setting in the range of 500 W – 3500 W in 200 W / 300 W increments. The digital display shows the corresponding power.
-
Page 9: Waste Disposal
When the device may not be longer used each consumer is obliged to dispose of the device at the dedicated local collection point, separately from household waste. Bartscher GmbH phone: +49 5258 971-0 Franz-Kleine-Str. 28 fax:...