Table of Contents
Advertisement
Available languages
Available languages
Remote-View via Mobile Phone
1.
Connect the machine to network cable from wireless router
2.
On the OSD, „Menu" > "system setting" > "network", select "Dynamic IP"
3.
Download the app „P2P live" in android market or app store on your mobile phone
4.
Connect your mobile phone to the wireless router's AP
5.
Open „P2P live" app, press search, then will see the UID of the machine, then select it.
The factory default password is: "000 000"
6.
If you want to change the camera resolution on mobile phone view, press „edit camera"
Note: Set state IP, according to your internal net setting, input an ip on „Menu> system
setting > network > state IP", after it connects successfully to the router, the rest setting
are the same.
1. Use the specific output cable
2. Enter "System Setting" > "Video Out"
3. Select "PAL" or "NTSC"
4. Press the "AV" button to transfer the signal to anther monitor
5. Press the "AV" button again to return LCD display.
AV Output
23
Advertisement
Table of Contents
