Camera Pairing - Duramaxx 10027068 Manual

Camera
1 Camera antenna: Sends signals to
and receives signals from receiver.
2 Lens: With IR LEDs that light up the
filmed area.
3
IR LED.
4 Bracket: To mount the camera on a
wall or other surface.
5
Pairing
6
Microphone: transmit voice into
digital sigal.
7 DC connection.
The system comes with camera(s) that have already been paired at the factory. Power on
the receiver and camera by connecting it to power outlet with supplied power adaptor re-
spectively. The pairing function assigns each camera to a different channel on the wireless
Receiver (up to 4 cameras),and is necesssary for configuring additional cameras.
NOTE: Pair the cameras to the receiver before permanently mounting the cameras.
1. Power on the receiver and camera by connecting it to power outlet with supplied Power
adaptor
2. Press the "Menu" button on receiver or remote controller to select "Camera Setting/Pairing"
3. Select a channel by pressing the
joystick on the monitor.
4. A message will be dispalyed on the receiver screen. The receiver will count down from
30 to 0 you must press the "pair" button on the camera during this time to successfully
pair the camera.
5. Press the "pair" button on the DC cable of the camera in 10 seconds.
Note: If the button on the camera is not pressed, the receiver will display "Pair Fail" and no
pairing will take place.
18

Camera Pairing

buttons on the remote controller or pushing the