3. Installation of outdoor unit
3.10.6 Mode Lock
Setting Procedure
1. Set the Dip Switch as follow after shutting the power source down.
Only Cooling Mode
2. Reset the power.
Mode Lock with Night Quiet Mode
Mode Lock (Cooling) + Night
Quiet Mode (step 1)
Mode Lock (Cooling) + Saving
Power Consumption (step 1)
Mode Lock (Cooling) + Saving
Power Consumption (step 2)
Only Heating Mode
Mode Lock (Cooling) + Night
Quiet Mode (step 2)
Mode Lock (Heating) + Saving
Power Consumption (step 1)
Mode Lock (Heating) + Saving
Power Consumption (step 2)
Heat pump
_ 68
50Hz/R410A