What You Will Need To Set Up Your Camera; Installing The Batteries; Installing The Sd Card; Camera Button Control Diagram - Covert Scouting Cameras WC30-V Instruction Manual

What You Will Need to Set Up Your Camera
Installing the Batteries
Your WC30 can function short term on 6AA batteries. To function on 6 batteries, one full side of the battery case must
have all 6 batteries installed, either the front or back of the case. Improved battery life on 8AA, but we suggest you use
12AA batteries to get the most out of your camera's battery life.
To remove the battery tray, open the front case of the camera and press the button in the bottom right corner, and the
battery case will pop out the bottom of the camera.
Install batteries by sliding the top battery into the sleeve, then depressing the spring with the other battery and
snapping down in place. Pay attention to the (+) of (‐) molded into each sleeve to determine if you insert the positive or
negative end into the sleeve first. The negative battery terminal (the flat end) always contacts the spring.
Installing the SD Card
Now that you have activated your plan, you will need to install an SD card in the right side of the camera. We
recommend a Covert SD card. Other SD cards may work, but also use an encryption that may not be compatible with
your camera. See below for card orientation. Push the card in until it clicks and release. To remove, repeat that process,
the card will pop out enough to remove. You can use any SD card up to 32 GB.
Camera Button Control Diagram
Viewing Screen
SIM Card Slot
SD
Card
Battery Tray Eject
4