Safety Notes; Transport, Storage And Packaging - oventrop Regusol X-2S Installation And Operating Instructions Manual

2 Safety notes

2.1 Correct use
Safety in operation is only guaranteed if the supple-
mentary set is used correctly.
The supplementary set is used for the extension of a
"Regusol X" station for the interconnection and regu-
lation of different collector fields.
Any use of the supplementary outside the above
applications will be considered as non-compliant and
misuse. Claims of any kind against the manufacturer
and/or his authorised representatives, due to damages
caused by incorrect use cannot be accepted.
The observance of the installation and operating
instructions is part of the compliance terms.
2.2 Possible dangers at the installation location or
during transport
WARNING
Heavy product group
Risk of injury Suitable transport and lifting devices
are to be used. Wear suitable protective clothing
(e.g. safety shoes) during installation and use safety
devices. External components like handwheels or
levers must not be misused for the absorption of
external forces, e.g. as connection point for lever
tools etc.
Hot or cold surfaces
Risk of injury Do not touch the product group
without safety gloves. It may get very hot during
operation.
Before starting work, please make sure that all
components have cooled down to ambient
temperature.
Sharp edges
Risk of injury Only touch with safety gloves.
Threads, bore holes and edges are sharp.
Small components
Risk of ingestion Store and install the components
of the supplementary set out of reach of children.
Allergies
Health hazard Do not touch the supplementary
set and avoid any contact if allergies against the
used materials are known.
3 Transport, storage and
packaging
3.1 Transport inspection
Upon receipt check delivery for any damages caused
during transit.
Any damage must be reported immediately upon
receipt.
3.2 Extent of supply
2
3
3
Illustr. 3.2 Supplementary set
1. Pump assembly solar circuit 1
2. Ball valve group solar circuit 2
3. Seals (4x)
4. Pump cable (2x)
5. Insulation screen
6. Interface adapter
3.3 Storage
The supplementary set must only be stored under the
following conditions:
– Do not store in open air, keep dry and free from dust.
– Do not expose to aggressive fluids or heat sources.
– Protect from direct sunlight and mechanical agitati-
on.
– Storage temperature: –20°C up to +60°C
– Max. relative humidity of air: 95 %
3.4 Packaging
Packaging material is to be disposed of environmen-
tally friendly.
3
5
1
6
4
9