Singer SteamWorks Classic Instruction Manual page 5

STEP 1
Loosen the Pole Connector and
insert Telescopic Pole. Tighten
Pole Connector to secure
Telescopic Pole in Place.
Insert

Unscrew

to loosen
STEP 3
Install the Steam Hose and tighten the Hose
Connector.

WARNING: ALWAYS HANG THE STEAM HEAD ON THE STEAM HEAD HANGER WHEN
NOT IN USE TO PREVENT INJURY AND SURFACE DAMAGE.
MAKE SURE THE TELESCOPIC POLE IS FULLY EXTENDED DURING USE TO ENSURE
A SMOOTH STEAM FLOW THROUGH THE HOSE.
DO NOT PULL THE HOSE WITH EXCESSIVE FORCE OR MOVE IT BY PULLING ON THE
HOSE. DAMAGE OR INJURY MAY RESULT.
Set Up Your SteamWorks
Garment Steamer

Tilt the Pole at
slight angle
Screw

STEP 2
Attach Folding Hanger to the top of Telescopic
Pole. Extend Telescopic Pole to desired height
and lock in place.
Swivel
Connector
Unlock

STEP 4
Fully extend Hanger Arms and hang the Steam
Nozzle.
Pull
Classic
™
Insert


Lock
ENGLISH – 5