Table of Contents
Advertisement
Using the Agilent 81101A
The Configuration Screen
The Configuration Screen
Use the Configuration screen to
• set the GP-IB address of the Agilent 81101A,
• perform a selftest,
• select the frequency reference source and the frequency for the PLL.
To access the Configuration screen, press the CONFIG softkey. If the
CONFIG softkey is not displayed, press MORE.
GP-IB Address
Set the GP-IB address for the instrument in the range of 0 to 30. The
default address is 10.
Perform Operation Selftest
Move the entry focus to P
If the selftest fails, a flashing E is displayed. Press HELP to see the list of
error messages.
70
GPIB-Address:
Perform Selftest: µP and Signal
Group Params by:
Pulse-Period:
PLL-Ref:
Internal
Deskew 1:
LIMITS
10
TIMING/LEVELS
internal PLL
+0ps
2:
TRG-LEV
MEMCARD
: S
ERFORM
ELFTEST
MODIFY
10
+0ps
CONFIG
and press the ENTER key.
Advertisement
Table of Contents
