Agilent Technologies 81101A Quick Start Manual page 32

Getting Started
Setting Up a Clock Signal
9 Press SHIFT + MORE (GRAPH) to return to the textual screen.
To set the level parameters as required:
1 Move the entry focus to O
2 Move the entry focus to the high level entry field, enter 2.5 and press
N O T E
There is also a graphical screen available for the level parameters.
32
1
ON
MODE/TRG
You can modify the parameter displayed in the Modify/Enter area, and
immediately check how your changes affect the signal. Use the cursor
keys to switch to another parameter.
select H -L .
IGH OW
the ENTER key.
In the same way, enter 0 for the low level. The impedance is 50Ω
source into 50Ω load by default.
Freq 25.00MHz Normal
Delay 0.0ps
DtyCyc 50.00%
LeadE 6.00ns
TraiE =LeadE
MODE/TRG
OUTPUT LIMITS
/A
FFSET MPLITUDE
ON
High +2.50V
Low +0.00V
50Ω Ω Ω Ω into 50.0Ω Ω Ω Ω
OUTPUT LIMITS
LeadEdge1
6.00
ns
TRG-LEV
and turn the knob to
1
MODIFY
+2.50
V
TRG-LEV