Restore Factory Settings; Technical Specs - Tele System PALCO SC10 Manual

TELE System
WARNING! The wrong antenna configuration can result in the failure to load some or all
channels. If you do not know the characteristics of your antenna system and/or are unable
to properly configure the receiver yourself, you may want to consult a professional installer
for advice. The power and signal quality indicators refer to the first transponder of the
chosen satellite list

Restore Factory Settings

This function allows you to restore factory settings. To do so, select Restore settings ... and
on the new screen, select YES. The television will be restored to its factory settings.
WARNING! Restoring the factory settings starts the installation wizard (see section "First
Installation"), and also clears all previously memorized channels and settings set by the user.

Technical specs

Inputs
TV Signal
Specs
Size (w x h x d)
Wall mount support
Accessories
(1)
use the RCA/SCART cable as adapter to connect the external device to AV in
Tele System Digital declares, under its own responsibility, that this product meets the
essential requirements of European directives. The complete EU conformity declaration is
available on: https://www.telesystem.it/CE
Display
Resolution
Contrast ratio
Brightness
Angle of view
HDMI
A/V in
(1)
USB
VGA
RF input DVB-T
RF input DVB-S
Video
Audio
Speaker
Power supply
Consumption
Supported format
With stand
Without stand
Simplified EU conformity declaration
Diagonal 39,5" (100 cm) 16:9 Wide
1920(H) x 1080(V) – Full HD
5000:1
250 (cd/m )
2
176°/176° (H/V)
3
1
1 –Mediaplayer
DSUB15 + Audio PC
75 Ω – VHF/UHF - 7MHz/8MHz
1 tipo F
MPEG2, MPEG4 H.264/AVC e H.265/HEVC
MPEG1 layer1/2; DD; DD+; AAC; HE-AAC
2 x 10 Watt
100V – 240V ~ 50/60Hz
<0,5W in Stand-by; <70W Max
AVI/MP4/MKV (compatible H.265)
903 x 561 x 222 mm
903 x 517 x 87 mm
VESA 200/100
Standard Remote control unit, Easy remote
control, RCA/SCART adapter, User manual.