Frequently Asked Questions - Orca 050CL Operating And Maintenance Instructions Manual

Installation and removal of the swivel plate
3.3
To install the swivel plate, it must be inserted into the base. To remove it, push the loop upwards.

4.0 FREQUENTLY ASKED QUESTIONS

Attention! In any case, always comply with the safety instructions set out in point I.I. at the
beginning of this manual in order to avoid potential mechanical or physical damage.
observation
The cleaner does not
work and the indicator
light flashes slowly.
The cleaner does not
work and the light flashes
quickly.
The cleaner does not
work and the light goes
out
The charger indicator light
does not light up
The device does not
reach the entire pool
Possible cause
Low remaining battery
capacity
Internal fault
Battery protection
Charger failure
Inappropriate nozzle
angle
The shape of the pool
is special
The filtration system is
in operation.
28
Solution
Charge the battery
contact the after-sales service
Charge the battery and turn on the unit to
check if the indicator light is on. If not,
contact the after-sales service
contact the after-sales service
Adjust the nozzles
Set the nozzle to a large mark for a wider
path.
Stop the filtration system.