Cradle - Sony XDP-MU110 Operating Instructions Manual

Cradle

 Suction cup
 SEEK / buttons*
Press to skip tracks.
 Remote sensor
 Indicator
You can check the status of the DSP
master unit.
Indicator
Turns blue.
Turns red.
Flashes blue.
Flashes red.
Flashes blue
and red
alternately.
6
*
1 2
Status
A car audio unit is selected as
the source.
An iPod/iPhone is selected as
the source.
Diagnostic error. See
"Troubleshooting" (page 20).
Overload error when an
iPod/iPhone is selected as the
source. See
"Troubleshooting" (page 20).
Temperature detection is
working. See
"Troubleshooting" (page 20).
 VOLUME (VOL) +/–*
 SOURCE/OFF button
Press to turn on the power/change the
source between a car audio unit and an
iPod/iPhone.
Press and hold more than two seconds
to turn off the system. The indicator
() turns off.
 Port for the cradle cable
Used for connecting the cradle cable.
 Cover for the suction cup
 PUSH RELEASE button
Push to stretch the arm.
 LOCK/RELEASE lever
Turn to lock/release the suction cup.
 PUSH button
Press hard to secure the cradle on the
dashboard.
 Tab
Pull up to remove the cradle from the
dashboard.
*1  has a tactile dot.
*2 These buttons work only when an iPod/
iPhone is selected as the source and the music
player on an iPod/iPhone is activated.
2