Supply Connections - Kohler Kumin K-104K36-SANA-CP Installation Manual

Flex Hose
Supply
Stop

4. Supply Connections

Inlet Connections
Connect the flex hose from the control box to the supply stop.
Outlet Connections
Verify that the tube from the spout is the appropriate length to
reach the control box. Cut the tube if necessary. Remove any
burrs and sharp edges.
Insert the tube into the fitting (control box outlet end) until the
tube stops.
Verify that the tube is secure.
1357694-2-A
Tube
Flex Hose
From Spout
Outlet
6
Inlet
Kohler Co.