Product Description (Satellites) - Pronomic V-Array Series Manual

12. power plug & fuse
Use the mains cable supplied to connect the unit to a mains socket and thus supply
the unit with power
Only use the same fuse that is installed from the factory (250 Volt)

Product description (satellites)

4
1. Input
Input from subwoofer or previous element
2. Parallel output
Output for a parallel connection
3. Serial output
Output for serial connection
4. Serial output switch
Parallel or serial connection of the next element
Set the switch to the OFF position to connect the next element in parallel.
Set the switch to ON to connect the next element in series. The slide switch of the
last element must be set to OFF
Only wire the satellites as described on the following pages
! WARNUNG
5
V-Array
1
2
3