Product Description (Subwoofer) - Pronomic V-Array Series Manual

V-Array

Product description (Subwoofer)

1. volume control knob for satellites
With this control you can adjust the volume of the tops compared to the subwoofer
2. volume control knob for subwoofer
With this control you can adjust the volume of the subwoofer in comparison to the
satellites
3. DSP LEDs
These LEDs indicate which DSP preset is selected
4. line input
Use these combo jacks (XLR or 6.3mm jack) to connect sound sources to the
system such as a mixing console or other stereo sources
5. link output
With these XLR sockets you can continue to loop the input signal unamplified. This
allows you to use e.g. another system or another mixing console, etc.
6. DSP Knob
With this control you can choose between the different DSP presets (see also item
DSP Presets Diagram). The following presets are available
Flat: LowCut
Live1: LowCut, HighCut
Live2: LowCut, HighCut, centre cut
DJ1: LowCut, HighCut, mid cut, bass boost
DJ2: LowCut, HighCut, mid cut, bass boost
7. bluetooth power button
With this button you can activate (press button - on) or deactivate (not pressed
button - off) the Bluetooth connection
8. stereo/mono button
Stereo (button not pressed): Input L routes the input signal to Output L, Input R
routes the input signal to Output R
Mono (button pressed): The mono sum of input L and R is routed to both outputs
9. voltage selector switch
Here the power supply can be adjusted for countries with 115V mains voltage.
! WARNUNG
If the wrong voltage is selected, the system can be seriously damaged!
10. outputs for tops
Use these Speaker Twist sockets to connect your subwoofer with the satellites
11. on/off switch
This is the switch for power the product on and off
4