Specifications; General Power Tool Safety Warnings; Save All Warnings And Instructions For Future Reference - Makita BO6030 Instruction Manual

ENGLISH
1. Lock button
2. Switch trigger
3. Speed adjusting dial
4. Notches
5. Front grip
6. Hole in front grip
7. Screwdriver
8. Abrasive disc
9. Hex wrench

SPECIFICATIONS

Pad diameter
Abrasive disc diameter
Orbits per minute (min
Sanding stroke rate (min
Overall length
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2014
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
.... Read instruction manual.
.............. DOUBLE INSULATION
................. Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European Directive,
on Waste Electric and Electronic
Equipment and its implementation in
accordance with national law, electric
equipment that have reached the end of
their life must be collected separately and
returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
Explanation of general view
10. Screw
11. Pad
12. Dust nozzle
13. Dust bag
14. Push button
15. Hook
16. Groove
17. Front fixing cardboard
18. Front side of paper dust bag
Model
-1
)
-1
)
Net weight
Safety class
END201-7
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
General power tool safety
warnings
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
ENE052-1
Work area safety
1. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
19. Claws
20. Upper part
21. Notch
22. Guide
23. Sponge pad
24. Felt pad
25. Wool pad
BO6030
150 mm
150 mm
4,000 - 10,000
8,000 - 20,000
309 mm
2.4 kg
/II
ENF002-1
GEA012-2
5