Midland G13 Instruction Manual page 26

Pmr446 transceiver
Table of Contents

Advertisement

Available languages

Available languages

Battery recharge
G13 is equipped for using a 7,4V Li-ion rechargeable battery pack, which can be
recharged by connecting the socket of the AC/DC wall adaptor to a mains power
socket and inserting the jack of the wall adaptor into the desktop charger plug.
It takes 5 hours to fully recharge the radio.
The led of the desktop charger indicates the status of the recharge:
Red = charging,
Green = full charge
For maximum battery life, we recommend you to charge the battery pack when G13
is swtiched off and the battery pack is fully discharged.
Note: Using a different battery charger other than the one specified can cause damage
to your device or may even cause explosions and personal injuries.
The Battery power saving feature enables a reduction in consumption of up to 50%
and saves the battery life. If it has been set, it automatically activates when the
transceiver does not receive any signal for more than 5 seconds. Power saving can
be disabled only through the Programming software.
6 |
Midland G13 instruction guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents