Realtek Combo NGFF User Manual page 6

forth for an uncontrolled environment. This equipment should be installed
and operated with a minimum distance of 20cm between the radiator &
your body. If the module is installed in a portable host, a separate SAR
evaluation is required to confirm compliance with relevant FCC portable
RF exposure rules.
2.7 Antennas
The following antennas have been certified for use with this module; antennas of the
same type with equal or lower gain may also be used with this module. The antenna
must be installed such that 20 cm can be maintained between the antenna and users.
Approved antenna(s) list :(Mobile)
Antenna
Chain NO.
Set
Chain 0 LYNwave ALA110-222050-300011
1
Chain 1 LYNwave ALA110-222050-300011
Chain 0
2
Chain 1
For SAR :(Portable)
Brand
REALTEK
2.8 Label and compliance information
The final end product must be labeled in a visible area with the following:
"Contains FCC ID:
when all FCC compliance requirements are met.
2.9 Information on test modes and additional testing requirements
Brand Model
PSA RFDPA171320EMLB301
PSA RFDPA171320EMLB301
Model
RTK-ANT-0006
TX2-RTL8822C
RTL8822C User's Manual
Antenna Frequency
Gain
(dBi)
3.5 2.4~2.5
5 5.15~5.85
3.5 2.4~2.5
5 5.15~5.85
3.14 2.4~2.5
5 5.15~5.85
3.14 2.4~2.5
5 5.15~5.85
Antenna Frequency
Gain range
(dBi) (GHz)
3.5 2.4~2.5
5 5.15~5.85
". The grantee's FCC ID can be used only
Antenna Connector
range
Type
(GHz)
PIFA i-pex(MHF)
PIFA i-pex(MHF)
i-pex(MHF)
Dipole
i-pex(MHF)
Dipole
Antenna Connector
Type Type
PIFA i-pex(MHF)
Type