Level Adjustment - Johansson 6505UK Use Manual

LEVEL ADJUSTMENT

Level setting
To set the level.
- Select the desired cluster.
- Turn the button to select the Filter & Input Selection mode.
- Push the rotary button to enter the selected mode.
- Turn the button to select cluster 2.
- Push the button to confirm.
- Turn the button to select the Level mode.
- Push the rotary button to enter the selected mode.
- Turn the button to set the level, variable from 30 dB to 0 dB.
- Push the button to confirm.
Example : setting the level of cluster 2
Filter & Input Selection
Filter & Input Selection
VHF
Filter & Input Selection
Level
Level
Level
Repeat this section to set all levels
LED is green
LED is red
1 2 3 4 5 6 7 8 9
LED is acitvated
LED is green
LED is green
LED is red
Note:
'30' is for maximum gain.
'18' indicates 12 dB attenuator.
LED is green
9