Table of Contents
Advertisement
CLUSTER PROGRAMMING
Setting clusters per input
- The filter-equalizer has 2 UHF input which are splitted over 9 clusters and 1 VHF input for 1 cluster.
There are three possible configurations:
Input
UHF1
UHF2
Number of
9
cluster(s)
6
5
To select the number of UHF clusters:
- Turn the button to select Split UHF.
- Push the button to confirm.
- Turn the button to set one configuration.
VHF cluster indication
UHF1 cluster indication
UHF2 cluster indication
- Push the button to confirm.
Note:
Each non used cluster has to be switched off (park function).
Set the cluster to channel 00 (see "Setting channels / cluster").
UHF 1 clusters are indicated by the RED LEDs n° 1 to 9.
0
UHF 2 clusters are indicated by the GREEN LEDs n° 6 to 9.
3
4
Select position n° 00 to have access to the settings
See "Presets" on page 5.
VHF
1
2
3
4
5
6
7
8
9
LED is green
Split UHF
LED is red
Split UHF
Display of selected configuration :
Input
Number of
clusters
LED is green
Split UHF
Display
UHF1
UHF2
"9.0"
9
0
"6.3"
6
3
"5.4"
5
4
6
Advertisement
Table of Contents
