Table of Contents
Advertisement
Setting channels / cluster
Each UHF cluster has a bandwidth which can be programmed from 1 to 2 channels.
Each VHF cluster has one channel bandwidth.
To set the channel(s) per cluster :
In the following example cluster 1 is set for channel 22 to channel 23.
- Turn the button to select the Filter & Input Selection mode.
- Push the rotary button to enter the selected mode.
- Inside the mode, turn the button to select the cluster to be set.
- Push the button to confirm.
- Turn the button to select the Start mode.
- Push the rotary button to enter the selected mode.
- Turn the button to select the start channel
- Push the button to confirm.
- Turn the button to select the Stop mode.
- Push the rotary button to enter the selected mode.
- Turn the button to select the stop channel
- Push the button to confirm.
Repeat this section to set all clusters
Mode is indicated
with a GREEN coloered LED
Filter & Input Selection
LED is red
Filter & Input Selection
VHF
1
2
3
4
5
6
7
LED n° 1
LED is green
Filter & Input Selection
LED is green
Start
LED is red
Start
Display
LED is green
Start
Stop
LED is green
Stop
LED is red
Display
Stop
LED is green
= GREEN LED
= RED LED
8
9
7
Advertisement
Table of Contents
